Pakrovėjas 6 V – 12 V / 4 A

6 programs

• Program 1: 6 V (7.2 V/1 A)
  Suitable for 6 V batteries with a normal capacity between 1.2 Ah and 14 Ah. Charging program for WET, MF batteries and most GEL batteries.
• Program 2: 6V (7.4V/1A)
  Suitable for 6V batteries with a capacity between 1.2 Ah and 14 Ah in cold conditions (from 10 °C and colder). This charging program is also designed for many AGM batteries
• Program 3: 12V (14.4V/1A)
  Suitable for 12V batteries with a normal capacity between 1.2 Ah and 14 Ah. Charging program for WET, MF batteries and most GEL batteries.
• Program 4: 12V (14.7V/1A)
  Suitable for 12V batteries with a capacity between 1.2 Ah and 14 Ah in cold conditions (from 10 °C and colder). This charging program is also designed for many AGM batteries.
• Program 5: 12V (14.4V/4A)
  Suitable for 12V batteries with a normal capacity between 14 Ah and 120 Ah. Charging program for WET, MF batteries and most GEL batteries.
• Program 6: 12V (14.7V/4A)
  Suitable for 12V batteries with a capacity between 14 Ah and 120 Ah when cold (from 10 °C and colder). This charging program is also designed for many AGM batteries.

11 loading steps

• Step 1 – MEASUREMENT
  After the correct connection, the LCD display provides an initial statement about the state of charge and the condition of the battery.
• Step 2 – INITIALIZATION AND SULFATION BREAK
  Checks the condition of the battery to determine the charging process.
• Step 3 – SOFT-START
  Starts the charging process with ½ value at a preselected 4A current.
  In this way, the battery is slowly preheated to enable it to be fully charged.
• Steps 4-7 – CONSTANT CURRENT CHARGING
  Delivers 85% of battery capacity by charging at 4 different current levels that fully charge the battery.
• Step 8 – CONSTANT VOLTAGE CHARGE
  Brings the charge level to 95% at maximum charge voltage by gradually reducing the current, which limits battery gassing and thus extends battery life.
• Step 9 – FLOAT CHARGE
  Stops charging and brings the battery to maximum capacity at trickle charge voltage.
• Step 10 – ANALYSIS/REGENERATION
  The charging current is switched off and it is checked whether the battery can hold the voltage. If the voltage drop is too great, the regeneration mode is started to restore lost capacity.
• Step 11 – MAINTENANCE
  Monitors battery health. If the battery voltage falls below a certain value, the last charging program selected will be restarted. This maintains the state of charge of the battery in the most gentle way and without overcharging.

Technical specifications:

• Specification: at 12 V: 3.8 A / 0.8 A, 6 V: 0.8 A, microprocessor controlled
• Power supply: 230V, 50 Hz
• Charging voltage: Normal: 14.4V (12V) / 7.2V (6V) / AGM 14.7V (12V) / 7.4V (6V), Regeneration step: 16V (12V) / 8V (6V)
• Min. battery voltage: 0.7 V
• Current consumption: Max. 0.9 A / 230 V
• Type of charger: 11 charging steps, automatic charging cycle
• Ambient temperature: -10 – +40 °C
• Reverse current: 0.2 mA after charging is complete (if charger remains connected to 230V) 50 mA if charger is disconnected from 230V.
• Battery type: 6V/12V lead-acid battery, standard, stop+go maintenance free, CA-CA, AGM and gel battery
• Recommended battery capacity: 1.2 – 120 Ah
• Protection class: IP65, protected against water jets
• Protection: reverse polarity, thermal and overload protection, time control
• Charging cable with pliers: approx. 1.5 meters
• Power cord: about 1.5 meters